dmesg - Intel Celeron N3450
random: get_random_bytes called from start_kernel+0x42/0x46e with crng_init=0
Linux version 4.13.0-041300rc2-generic (kernel@tangerine) (gcc version 6.3.0 20170618 (Ubuntu 6.3.0-19ubuntu1)) #201707232231 SMP Mon Jul 24 02:32:52 UTC 2017
Command line: \vmlinuz-4.13.0-041300rc2-generic root=/dev/mmcblk1p3 quiet splash initrd=\initrd.img-4.13.0-041300rc2-generic
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
BIOS-e820: [mem 0x0000000012151000-0x0000000077982fff] usable
BIOS-e820: [mem 0x0000000077983000-0x0000000079a7bfff] reserved
BIOS-e820: [mem 0x0000000079a7c000-0x0000000079a96fff] ACPI data
BIOS-e820: [mem 0x0000000079a97000-0x0000000079af8fff] ACPI NVS
BIOS-e820: [mem 0x0000000079af9000-0x0000000079e78fff] reserved
BIOS-e820: [mem 0x0000000079e79000-0x000000007a1ecfff] usable
BIOS-e820: [mem 0x000000007a1ed000-0x000000007a1edfff] ACPI NVS
BIOS-e820: [mem 0x000000007a1ee000-0x000000007a217fff] reserved
BIOS-e820: [mem 0x000000007a218000-0x000000007a764fff] usable
BIOS-e820: [mem 0x000000007a765000-0x000000007a766fff] reserved
BIOS-e820: [mem 0x000000007a767000-0x000000007affffff] usable
BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x6d6c6018-0x6d6d6057] usable ==> usable
e820: update [mem 0x6d6c6018-0x6d6d6057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000003efff] usable
reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] reserved
reserve setup_data: [mem 0x0000000000040000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable
reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
reserve setup_data: [mem 0x0000000012151000-0x000000006d6c6017] usable
reserve setup_data: [mem 0x000000006d6c6018-0x000000006d6d6057] usable
reserve setup_data: [mem 0x000000006d6d6058-0x0000000077982fff] usable
reserve setup_data: [mem 0x0000000077983000-0x0000000079a7bfff] reserved
reserve setup_data: [mem 0x0000000079a7c000-0x0000000079a96fff] ACPI data
reserve setup_data: [mem 0x0000000079a97000-0x0000000079af8fff] ACPI NVS
reserve setup_data: [mem 0x0000000079af9000-0x0000000079e78fff] reserved
reserve setup_data: [mem 0x0000000079e79000-0x000000007a1ecfff] usable
reserve setup_data: [mem 0x000000007a1ed000-0x000000007a1edfff] ACPI NVS
reserve setup_data: [mem 0x000000007a1ee000-0x000000007a217fff] reserved
reserve setup_data: [mem 0x000000007a218000-0x000000007a764fff] usable
reserve setup_data: [mem 0x000000007a765000-0x000000007a766fff] reserved
reserve setup_data: [mem 0x000000007a767000-0x000000007affffff] usable
reserve setup_data: [mem 0x000000007b000000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000001ffffffff] usable
efi: EFI v2.50 by American Megatrends
efi: ESRT=0x79d99d98 ACPI=0x79a84000 ACPI 2.0=0x79a84000 SMBIOS=0x79cef000 SMBIOS 3.0=0x79cee000
random: fast init done
SMBIOS 3.0.0 present.
DMI: Jumper EZbook/P313R, BIOS JUMPER2x.P8.WP313R.NHNAUHN04 06/22/2017
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-6FFFF write-back
70000-7FFFF uncachable
80000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007B000000 mask 7FFF000000 uncachable
3 base 0100000000 mask 7F00000000 write-back
4 base 00FF800000 mask 7FFF800000 write-combining
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000079d99d98 to 0x0000000079d99dd0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8c1dc0098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x198124000, 0x198124fff] PGTABLE
BRK [0x198125000, 0x198125fff] PGTABLE
BRK [0x198126000, 0x198126fff] PGTABLE
BRK [0x198127000, 0x198127fff] PGTABLE
BRK [0x198128000, 0x198128fff] PGTABLE
BRK [0x198129000, 0x198129fff] PGTABLE
BRK [0x19812a000, 0x19812afff] PGTABLE
BRK [0x19812b000, 0x19812bfff] PGTABLE
BRK [0x19812c000, 0x19812cfff] PGTABLE
BRK [0x19812d000, 0x19812dfff] PGTABLE
BRK [0x19812e000, 0x19812efff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x6d6d7000-0x7066ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000079A84000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079A840C0 0000F4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000079A8C630 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000079A84260 0083C8 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000079AC8080 000040
ACPI: FPDT 0x0000000079A8C750 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000079A8C7A0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MSDM 0x0000000079A8C840 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000079A8C8A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: DBG2 0x0000000079A8C8E0 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: DBGP 0x0000000079A8C960 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: HPET 0x0000000079A8C9A0 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: LPIT 0x0000000079A8C9E0 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: APIC 0x0000000079A8CA40 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: NPKT 0x0000000079A8CAD0 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: PRAM 0x0000000079A8CB40 000030 (v01 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: WSMT 0x0000000079A8CB70 000028 (v00 INTEL EDK2 00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079A8CBA0 003FDC (v02 INTEL DptfTab 00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079A90B80 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079A916E0 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913)
ACPI: SSDT 0x0000000079A92DD0 00039D (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: SSDT 0x0000000079A93170 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x0000000079A938A0 00032D (v02 PmRef Cpu0Tst 00003000 INTL 20120913)
ACPI: SSDT 0x0000000079A93BD0 00017C (v02 PmRef ApTst 00003000 INTL 20120913)
ACPI: SSDT 0x0000000079A93D50 00271A (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000079A96470 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: BGRT 0x0000000079A964C0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x0000000079A96500 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: WDAT 0x0000000079A96540 000104 (v01 00000000 00000000)
ACPI: NHLT 0x0000000079A96650 0002DD (v00 INTEL EDK2 00000002 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
NODE_DATA(0) allocated [mem 0x1fffd5000-0x1ffffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001ffffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000003efff]
node 0: [mem 0x0000000000040000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000000fffffff]
node 0: [mem 0x0000000012151000-0x0000000077982fff]
node 0: [mem 0x0000000079e79000-0x000000007a1ecfff]
node 0: [mem 0x000000007a218000-0x000000007a764fff]
node 0: [mem 0x000000007a767000-0x000000007affffff]
node 0: [mem 0x0000000100000000-0x00000001ffffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff]
On node 0 totalpages: 1534248
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7527 pages used for memmap
DMA32 zone: 481676 pages, LIFO batch:31
Normal zone: 16384 pages used for memmap
Normal zone: 1048576 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
PM: Registered nosave memory: [mem 0x6d6c6000-0x6d6c6fff]
PM: Registered nosave memory: [mem 0x6d6d6000-0x6d6d6fff]
PM: Registered nosave memory: [mem 0x77983000-0x79a7bfff]
PM: Registered nosave memory: [mem 0x79a7c000-0x79a96fff]
PM: Registered nosave memory: [mem 0x79a97000-0x79af8fff]
PM: Registered nosave memory: [mem 0x79af9000-0x79e78fff]
PM: Registered nosave memory: [mem 0x7a1ed000-0x7a1edfff]
PM: Registered nosave memory: [mem 0x7a1ee000-0x7a217fff]
PM: Registered nosave memory: [mem 0x7a765000-0x7a766fff]
PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0x80000000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff8c1fbfc00000 s119640 r8192 d31912 u524288
pcpu-alloc: s119640 r8192 d31912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1510252
Policy zone: Normal
Kernel command line: \vmlinuz-4.13.0-041300rc2-generic root=/dev/mmcblk1p3 quiet splash initrd=\initrd.img-4.13.0-041300rc2-generic
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5806424K/6136992K available (9249K kernel code, 2480K rwdata, 4040K rodata, 2320K init, 2388K bss, 330568K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 37518 entries in 147 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1094.400 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (8763.71 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x79a97000-0x79af8fff] (401408 bytes)
PM: Registering ACPI NVS region [mem 0x7a1ed000-0x7a1edfff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:10:12, date: 08/12/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8C1FB7D10200 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8C1FB7D8CC00 00015F (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8C1FB7D5B6C0 00008D (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.H_EC: Used as first EC
ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000
pci 0000:00:00.1: reg 0x10: [mem 0x92210000-0x92217fff 64bit]
pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000
pci 0000:00:03.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
pci 0000:00:0e.0: reg 0x10: [mem 0x92218000-0x9221bfff 64bit]
pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit]
pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
pci 0000:00:0f.0: reg 0x10: [mem 0x92245000-0x92245fff 64bit]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
pci 0000:00:12.0: reg 0x10: [mem 0x9221c000-0x9221dfff]
pci 0000:00:12.0: reg 0x14: [mem 0x92242000-0x922420ff]
pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:12.0: reg 0x24: [mem 0x92241000-0x922417ff]
pci 0000:00:12.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
pci 0000:00:15.0: reg 0x10: [mem 0x92200000-0x9220ffff 64bit]
pci 0000:00:15.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
pci 0000:00:16.0: reg 0x10: [mem 0x92240000-0x92240fff 64bit]
pci 0000:00:16.0: reg 0x18: [mem 0x9223f000-0x9223ffff 64bit]
pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000
pci 0000:00:16.1: reg 0x10: [mem 0x9223e000-0x9223efff 64bit]
pci 0000:00:16.1: reg 0x18: [mem 0x9223d000-0x9223dfff 64bit]
pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
pci 0000:00:16.2: reg 0x10: [mem 0x9223c000-0x9223cfff 64bit]
pci 0000:00:16.2: reg 0x18: [mem 0x9223b000-0x9223bfff 64bit]
pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000
pci 0000:00:16.3: reg 0x10: [mem 0x9223a000-0x9223afff 64bit]
pci 0000:00:16.3: reg 0x18: [mem 0x92239000-0x92239fff 64bit]
pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
pci 0000:00:17.0: reg 0x10: [mem 0x92238000-0x92238fff 64bit]
pci 0000:00:17.0: reg 0x18: [mem 0x92237000-0x92237fff 64bit]
pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000
pci 0000:00:17.1: reg 0x10: [mem 0x92236000-0x92236fff 64bit]
pci 0000:00:17.1: reg 0x18: [mem 0x92235000-0x92235fff 64bit]
pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000
pci 0000:00:17.2: reg 0x10: [mem 0x92234000-0x92234fff 64bit]
pci 0000:00:17.2: reg 0x18: [mem 0x92233000-0x92233fff 64bit]
pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000
pci 0000:00:17.3: reg 0x10: [mem 0x92232000-0x92232fff 64bit]
pci 0000:00:17.3: reg 0x18: [mem 0x92231000-0x92231fff 64bit]
pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
pci 0000:00:18.0: reg 0x10: [mem 0x92230000-0x92230fff 64bit]
pci 0000:00:18.0: reg 0x18: [mem 0x9222f000-0x9222ffff 64bit]
pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
pci 0000:00:18.1: reg 0x10: [mem 0x9222e000-0x9222efff 64bit]
pci 0000:00:18.1: reg 0x18: [mem 0x9222d000-0x9222dfff 64bit]
pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
pci 0000:00:18.2: reg 0x10: [mem 0xfea10000-0xfea10fff 64bit]
pci 0000:00:18.2: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
pci 0000:00:18.3: reg 0x10: [mem 0x9222c000-0x9222cfff 64bit]
pci 0000:00:18.3: reg 0x18: [mem 0x9222b000-0x9222bfff 64bit]
pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
pci 0000:00:19.0: reg 0x10: [mem 0x9222a000-0x9222afff 64bit]
pci 0000:00:19.0: reg 0x18: [mem 0x92229000-0x92229fff 64bit]
pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
pci 0000:00:19.1: reg 0x10: [mem 0x92228000-0x92228fff 64bit]
pci 0000:00:19.1: reg 0x18: [mem 0x92227000-0x92227fff 64bit]
pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
pci 0000:00:19.2: reg 0x10: [mem 0x92226000-0x92226fff 64bit]
pci 0000:00:19.2: reg 0x18: [mem 0x92225000-0x92225fff 64bit]
pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501
pci 0000:00:1b.0: reg 0x10: [mem 0x92224000-0x92224fff 64bit]
pci 0000:00:1b.0: reg 0x18: [mem 0x92223000-0x92223fff 64bit]
pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
pci 0000:00:1c.0: reg 0x10: [mem 0x92222000-0x92222fff 64bit]
pci 0000:00:1c.0: reg 0x18: [mem 0x92221000-0x92221fff 64bit]
pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501
pci 0000:00:1e.0: reg 0x10: [mem 0x92220000-0x92220fff 64bit]
pci 0000:00:1e.0: reg 0x18: [mem 0x9221f000-0x9221ffff 64bit]
pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
pci 0000:00:1f.1: reg 0x10: [mem 0x9221e000-0x9221e0ff 64bit]
pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [8086:3165] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x92100000-0x92101fff 64bit]
pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: PCI bridge to [bus 01]
pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI Warning: GPE type mismatch (level/edge) (20170531/evxface-826)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:18.2: can't claim BAR 0 [mem 0xfea10000-0xfea10fff 64bit]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6d6c6018-0x6fffffff]
e820: reserve RAM buffer [mem 0x77983000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7a1ed000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a765000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 19.200000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0400-0x047f] could not be reserved
system 00:00: [io 0x0500-0x05fe] has been reserved
system 00:00: [io 0x0600-0x061f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:18.2: BAR 0: assigned [mem 0x92243000-0x92243fff 64bit]
pci 0000:00:18.2: BAR 2: assigned [mem 0x92244000-0x92244fff 64bit]
pci 0000:00:14.0: PCI bridge to [bus 01]
pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff]
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
pci_bus 0000:01: resource 1 [mem 0x92100000-0x921fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 48740K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x67000000-0x6b000000] (64MB) mapped at [ffff8c1e27000000-ffff8c1e2affffff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
clocksource: Switched to clocksource tsc
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1502557813.710:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:14.0: Signaling PME with IRQ 120
efifb: probing for efifb
efifb: framebuffer at 0x80000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11242020
intel_idle: v0.4.1 model 0x5C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (32 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-041300rc2-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-041300rc2-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 7 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ACPI: Battery Slot [BAT0] (battery present)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
intel_rdt: Intel RDT L2 allocation detected
RAS: Correctable Errors collector initialized.
microcode: sig=0x506c9, pf=0x1, revision=0x1c
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2831921976, 0)->(2825992868, 5929108)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 7c74ed0efa0bd500c5a57cd76ea65c0076155bee'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 13:333:188
acpi device:47: hash matches
acpi device:1a: hash matches
rtc_cmos 00:04: setting system clock to 2017-08-12 17:10:14 UTC (1502557814)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2320K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 980K
Freeing unused kernel memory: 56K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b)
sdhci-pci 0000:00:1b.0: enabling device (0000 -> 0002)
mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit
sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b)
mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0x92241000 port 0x92241100 irq 367
ata2: SATA max UDMA/133 abar m2048@0x92241000 port 0x92241180 irq 367
sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b)
sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002)
mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
Setting dangerous option enable_rc6 - tainting kernel
Setting dangerous option enable_fbc - tainting kernel
Setting dangerous option semaphores - tainting kernel
[drm] Memory usable by graphics device = 4096M
checking generic (80000000 7e9000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
usb 1-4: new high-speed USB device number 2 using xhci_hcd
fbcon: inteldrmfb (fb0) is primary device
mmc1: new HS200 MMC card at address 0001
mmcblk1: mmc1:0001 NCard 57.6 GiB
mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
mmcblk1rpmb: mmc1:0001 NCard partition 3 4.00 MiB
mmcblk1: p1 p2 p3
usb 1-4: New USB device found, idVendor=0bda, idProduct=0129
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0-CRW
usb 1-4: Manufacturer: Generic
usb 1-4: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-7: new full-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-8: new high-speed USB device number 4 using xhci_hcd
usb 1-8: New USB device found, idVendor=058f, idProduct=5608
usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-8: Product: USB 2.0 Camera
usb 1-8: Manufacturer: Alcor Micro, Corp.
mmc3: new ultra high speed SDR50 SDHC card at address 0007
mmcblk3: mmc3:0007 SL32G 29.0 GiB
mmcblk3: p1
mmcblk3: error -5 sending stop command, original cmd response 0x900, card status 0x900
mmcblk3: error -5 transferring data, sector 60751864, nr 8, cmd response 0x900, card status 0x80000b00
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[drm] RC6 on
mmcblk3: r/w command failed, status = 0x80000900
mmcblk3: error -5 sending stop command, original cmd response 0x900, card status 0x900
mmcblk3: error -5 transferring data, sector 60751864, nr 8, cmd response 0x900, card status 0x80000b00
mmcblk3: error -5 sending stop command, original cmd response 0x900, card status 0x900
mmcblk3: error -5 transferring data, sector 60751864, nr 8, cmd response 0x900, card status 0x80000b00
mmcblk3: retrying using single block read
raid6: sse2x1 gen() 4585 MB/s
raid6: sse2x1 xor() 2790 MB/s
raid6: sse2x2 gen() 5320 MB/s
raid6: sse2x2 xor() 3245 MB/s
raid6: sse2x4 gen() 6063 MB/s
raid6: sse2x4 xor() 2232 MB/s
raid6: using algorithm sse2x4 gen() 6063 MB/s
raid6: .... xor() 2232 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 7710.000 MB/sec
generic_sse: 6945.000 MB/sec
xor: using function: prefetch64-sse (7710.000 MB/sec)
Btrfs loaded, crc32c=crc32c-intel
mmcblk3: r/w command failed, status = 0x80000900
random: crng init done
mmcblk3: error -5 sending stop command, original cmd response 0x900, card status 0x900
mmcblk3: error -5 transferring data, sector 60751864, nr 8, cmd response 0x900, card status 0x80000b00
mmcblk3: error -5 sending stop command, original cmd response 0x900, card status 0x900
mmcblk3: error -5 transferring data, sector 60751864, nr 8, cmd response 0x900, card status 0x80000b00
mmcblk3: retrying using single block read
F2FS-fs (mmcblk1p3): Mounted with checkpoint version = 29a3
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Reached target Swap.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
vhba: loading out-of-tree module taints kernel.
vhba: module verification failed: signature and/or required key missing - tainting kernel
scsi host2: vhba
systemd-journald[367]: Received request to flush runtime journal from PID 1
int3403 thermal: probe of INT3403:03 failed with error -22
input: Intel HID events as /devices/platform/INT33D5:00/input/input6
intel-hid INT33D5:00: platform supports 5 button array
input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7
tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
idma64 idma64.0: Found Intel integrated DMA 64-bit
idma64 idma64.1: Found Intel integrated DMA 64-bit
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
idma64 idma64.2: Found Intel integrated DMA 64-bit
idma64 idma64.3: Found Intel integrated DMA 64-bit
idma64 idma64.4: Found Intel integrated DMA 64-bit
idma64 idma64.5: Found Intel integrated DMA 64-bit
idma64 idma64.6: Found Intel integrated DMA 64-bit
idma64 idma64.7: Found Intel integrated DMA 64-bit
idma64 idma64.8: Found Intel integrated DMA 64-bit
idma64 idma64.9: Found Intel integrated DMA 64-bit
idma64 idma64.11: Found Intel integrated DMA 64-bit
idma64 idma64.12: Found Intel integrated DMA 64-bit
idma64 idma64.13: Found Intel integrated DMA 64-bit
snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-29.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-28.ucode failed with error -2
iwlwifi 0000:01:00.0: capa flags index 3 larger than supported by driver
iwlwifi 0000:01:00.0: loaded firmware version 27.455470.0 op_mode iwlmvm
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
SSE version of gcm_enc/dec engaged.
iwlwifi 0000:01:00.0: base HW address: b4:d5:bd:5b:7d:3b
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone3: failed to read out thermal zone (-5)
EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
EDAC pnd2: b_cr_tolud_pci=000000000 ret=-49
EDAC pnd2: Failed to register device with error -19.
media: Linux media interface: v0.10
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Linux video capture interface: v2.00
intel_telemetry_core Init
dw-apb-uart.8: ttyS4 at MMIO 0x92230000 (irq = 4, base_baud = 115200) is a 16550A
intel_telemetry: version 1.0.0 loaded
usbcore: registered new interface driver btusb
dw-apb-uart.9: ttyS5 at MMIO 0x9222e000 (irq = 5, base_baud = 115200) is a 16550A
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
dw-apb-uart.10: ttyS6 at MMIO 0x9222c000 (irq = 7, base_baud = 115200) is a 16550A
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (058f:5608)
uvcvideo 1-8:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Processing 5 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Selector 4 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
input: USB 2.0 Camera: USB 2.0 Camera as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel-spi intel-spi: gd25lq64c (8192 Kbytes)
iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
Creating 1 MTD partitions on "intel-spi":
0x000000000000-0x0000007ff000 : "BIOS"
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
audit: type=1400 audit(1502557823.956:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=830 comm="apparmor_parser"
audit: type=1400 audit(1502557823.956:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=830 comm="apparmor_parser"
audit: type=1400 audit(1502557823.956:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=830 comm="apparmor_parser"
audit: type=1400 audit(1502557823.956:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=830 comm="apparmor_parser"
audit: type=1400 audit(1502557823.956:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=832 comm="apparmor_parser"
audit: type=1400 audit(1502557823.960:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=834 comm="apparmor_parser"
audit: type=1400 audit(1502557823.964:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1502557823.964:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1502557823.964:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=833 comm="apparmor_parser"
audit: type=1400 audit(1502557823.965:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=829 comm="apparmor_parser"
new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
mmcblk3: r/w command failed, status = 0x80000900
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
mmcblk3: error -5 sending stop command, original cmd response 0x900, card status 0x900
mmcblk3: error -5 transferring data, sector 60751864, nr 8, cmd response 0x900, card status 0x80000b00
mmcblk3: error -5 sending stop command, original cmd response 0x900, card status 0x900
mmcblk3: error -5 transferring data, sector 60751864, nr 8, cmd response 0x900, card status 0x80000b00
mmcblk3: retrying using single block read
wlp1s0: authenticate with 74:ea:3a:d7:5c:ec
wlp1s0: send auth to 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: RX AssocResp from 74:ea:3a:d7:5c:ec (capab=0x411 status=0 aid=4)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
scsi 2:0:0:0: CD-ROM CDEmu Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
FAT-fs (mmcblk3p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=1153
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: AS2115
usb 2-2: Manufacturer: ASMedia
usb 2-2: SerialNumber: 00000000000000000000
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 2-2: USB disconnect, device number 2
usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=1153
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: AS2115
usb 2-2: Manufacturer: ASMedia
usb 2-2: SerialNumber: 00000000000000000000
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-2:1.0
scsi 3:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] Spinning up disk...
.
.
ready
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-2: USB disconnect, device number 3
print_req_error: I/O error, dev sda, sector 0
sd 3:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=1153
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: AS2115
usb 2-2: Manufacturer: ASMedia
usb 2-2: SerialNumber: 00000000000000000000
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-2:1.0
scsi 3:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
perf: interrupt took too long (3159 > 3151), lowering kernel.perf_event_max_sample_rate to 63250
perf: interrupt took too long (3994 > 3948), lowering kernel.perf_event_max_sample_rate to 50000
wlp1s0: deauthenticating from 74:ea:3a:d7:5c:ec by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sda] Synchronizing SCSI cache
tpm tpm0: A TPM error (325) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 301.549 msecs
PM: late suspend of devices complete after 24.413 msecs
PM: noirq suspend of devices complete after 43.535 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 368: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 1: no longer affine to CPU3
IRQ 4: no longer affine to CPU3
IRQ 5: no longer affine to CPU3
IRQ 8: no longer affine to CPU3
IRQ 9: no longer affine to CPU3
IRQ 12: no longer affine to CPU3
IRQ 14: no longer affine to CPU3
IRQ 27: no longer affine to CPU3
IRQ 28: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 37559.573 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.988 msecs
PM: early resume of devices complete after 5.758 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
usb 1-7: reset full-speed USB device number 3 using xhci_hcd
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 810.188 msecs
usb 1-7:1.0: rebind failed: -517
usb 1-7:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
[drm] RC6 on
done.
thermal thermal_zone3: failed to read out thermal zone (-5)
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
EXT4-fs (sda2): re-mounted. Opts: stripe=32679,data=ordered,commit=60
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
ACPI: button: The lid device is not compliant to SW_LID.
wlp1s0: authenticate with 74:ea:3a:d7:5c:ec
wlp1s0: send auth to 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: RX AssocResp from 74:ea:3a:d7:5c:ec (capab=0x411 status=0 aid=4)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
EXT4-fs (sda2): re-mounted. Opts: stripe=32679,data=ordered,commit=0
perf: interrupt took too long (4993 > 4992), lowering kernel.perf_event_max_sample_rate to 40000
xhci_hcd 0000:00:15.0: Cannot set link state.
usb usb2-port2: cannot disable (err = -32)
usb 2-2: USB disconnect, device number 4
sd 3:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
wlp1s0: deauthenticating from 74:ea:3a:d7:5c:ec by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
tpm tpm0: A TPM error (256) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 308.399 msecs
PM: late suspend of devices complete after 25.194 msecs
PM: noirq suspend of devices complete after 39.902 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
irq_migrate_all_off_this_cpu: 12 callbacks suppressed
IRQ 368: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 1: no longer affine to CPU3
IRQ 9: no longer affine to CPU3
IRQ 12: no longer affine to CPU3
IRQ 121: no longer affine to CPU3
IRQ 371: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 712.566 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.968 msecs
PM: early resume of devices complete after 5.445 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
usb 1-7: reset full-speed USB device number 3 using xhci_hcd
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 811.073 msecs
usb 1-7:1.0: rebind failed: -517
usb 1-7:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone3: failed to read out thermal zone (-5)
[drm] RC6 on
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-19)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and deactivated
usb 1-7: USB disconnect, device number 3
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0: Entering manufacturer mode failed (-110)
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0 sending frame failed (-19)
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0 sending frame failed (-19)
wlp1s0: authenticate with 02:08:22:40:2b:27
wlp1s0: send auth to 02:08:22:40:2b:27 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 02:08:22:40:2b:27 (try 1/3)
wlp1s0: RX AssocResp from 02:08:22:40:2b:27 (capab=0x431 status=0 aid=1)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
Bluetooth: hci0 command 0x1009 tx timeout
Bluetooth: hci0: Reading Intel device address failed (-110)
Bluetooth: hci0 sending frame failed (-19)
usb 1-7: new full-speed USB device number 5 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 5
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 6 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 6
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 7 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 7
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 8 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 8
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 9 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 9
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 10 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 10
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 11 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 11
wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlp1s0: authenticate with 02:08:22:40:2b:27
wlp1s0: send auth to 02:08:22:40:2b:27 (try 1/3)
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
wlp1s0: send auth to 02:08:22:40:2b:27 (try 2/3)
wlp1s0: send auth to 02:08:22:40:2b:27 (try 3/3)
wlp1s0: authentication with 02:08:22:40:2b:27 timed out
usb 1-7: new full-speed USB device number 12 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 12
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 13 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 13
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 14 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 14
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 15 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110)
usb 1-7: USB disconnect, device number 15
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 16 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 16
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 17 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 17
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 18 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110)
usb 1-7: USB disconnect, device number 18
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
usb 1-7: new full-speed USB device number 19 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0 command 0xfc11 tx timeout
Bluetooth: hci0: Exiting manufacturer mode failed (-110)
Bluetooth: hci0 command 0x0c03 tx timeout
Bluetooth: hci0 sending initial HCI reset command failed (-110)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
tpm tpm0: A TPM error (256) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 345.862 msecs
PM: late suspend of devices complete after 23.970 msecs
PM: noirq suspend of devices complete after 39.699 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 368: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 1: no longer affine to CPU3
IRQ 9: no longer affine to CPU3
IRQ 12: no longer affine to CPU3
IRQ 121: no longer affine to CPU3
IRQ 371: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 6700.380 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.948 msecs
PM: early resume of devices complete after 5.638 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
usb 1-7: reset full-speed USB device number 19 using xhci_hcd
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-7: device firmware changed
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 810.255 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 1-7: USB disconnect, device number 19
done.
thermal thermal_zone3: failed to read out thermal zone (-5)
[drm] RC6 on
usb 1-7: new full-speed USB device number 20 using xhci_hcd
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
tpm tpm0: A TPM error (256) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 304.597 msecs
PM: late suspend of devices complete after 25.505 msecs
PM: noirq suspend of devices complete after 39.416 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 6040.812 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.958 msecs
PM: early resume of devices complete after 5.667 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-7: reset full-speed USB device number 20 using xhci_hcd
PM: resume of devices complete after 717.280 msecs
usb 1-7:1.0: rebind failed: -517
usb 1-7:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone3: failed to read out thermal zone (-5)
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[drm] RC6 on
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
tpm tpm0: A TPM error (256) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 299.666 msecs
PM: late suspend of devices complete after 26.081 msecs
PM: noirq suspend of devices complete after 39.788 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 462.315 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.941 msecs
PM: early resume of devices complete after 5.787 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
usb 1-7: reset full-speed USB device number 20 using xhci_hcd
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 810.692 msecs
usb 1-7:1.0: rebind failed: -517
usb 1-7:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone3: failed to read out thermal zone (-5)
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[drm] RC6 on
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
wlp1s0: authenticate with 74:ea:3a:d7:5c:ec
wlp1s0: send auth to 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: RX AssocResp from 74:ea:3a:d7:5c:ec (capab=0x411 status=0 aid=3)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
wlp1s0: deauthenticating from 74:ea:3a:d7:5c:ec by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
tpm tpm0: A TPM error (256) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 306.910 msecs
PM: late suspend of devices complete after 23.217 msecs
PM: noirq suspend of devices complete after 43.418 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 18145.624 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.961 msecs
PM: early resume of devices complete after 5.529 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-7: reset full-speed USB device number 20 using xhci_hcd
PM: resume of devices complete after 717.975 msecs
usb 1-7:1.0: rebind failed: -517
usb 1-7:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone3: failed to read out thermal zone (-5)
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[drm] RC6 on
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
wlp1s0: authenticate with 74:ea:3a:d7:5c:ec
wlp1s0: send auth to 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: RX AssocResp from 74:ea:3a:d7:5c:ec (capab=0x411 status=0 aid=2)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
perf: interrupt took too long (6259 > 6241), lowering kernel.perf_event_max_sample_rate to 31750
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
wlp1s0: deauthenticating from 74:ea:3a:d7:5c:ec by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
tpm tpm0: A TPM error (256) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 299.938 msecs
PM: late suspend of devices complete after 26.227 msecs
PM: noirq suspend of devices complete after 39.359 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 368: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 1: no longer affine to CPU3
IRQ 9: no longer affine to CPU3
IRQ 12: no longer affine to CPU3
IRQ 121: no longer affine to CPU3
IRQ 371: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 30843.392 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.931 msecs
PM: early resume of devices complete after 5.285 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
usb 1-7: reset full-speed USB device number 20 using xhci_hcd
PM: resume of devices complete after 721.159 msecs
usb 1-7:1.0: rebind failed: -517
usb 1-7:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone3: failed to read out thermal zone (-5)
[drm] RC6 on
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
wlp1s0: authenticate with 74:ea:3a:d7:5c:ec
wlp1s0: send auth to 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: RX AssocResp from 74:ea:3a:d7:5c:ec (capab=0x411 status=0 aid=2)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=1153
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: AS2115
usb 2-2: Manufacturer: ASMedia
usb 2-2: SerialNumber: 00000000000000000000
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-2:1.0
scsi 3:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] Spinning up disk...
.
.
.
ready
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
wlp1s0: deauthenticating from 74:ea:3a:d7:5c:ec by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sda] Synchronizing SCSI cache
tpm tpm0: A TPM error (256) occurred stopping the TPM
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
PM: suspend of devices complete after 324.902 msecs
PM: late suspend of devices complete after 24.747 msecs
PM: noirq suspend of devices complete after 39.824 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
IRQ 368: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 1: no longer affine to CPU3
IRQ 9: no longer affine to CPU3
IRQ 12: no longer affine to CPU3
IRQ 121: no longer affine to CPU3
IRQ 371: no longer affine to CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 4266.910 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 39.969 msecs
PM: early resume of devices complete after 5.451 msecs
ACPI: EC: event unblocked
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
xhci_hcd 0000:00:15.0: port 6 resume PLC timeout
usb 1-8: reset high-speed USB device number 4 using xhci_hcd
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-7: reset full-speed USB device number 20 using xhci_hcd
PM: resume of devices complete after 721.724 msecs
usb 1-7:1.0: rebind failed: -517
usb 1-7:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone3: failed to read out thermal zone (-5)
[drm] RC6 on
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
wlp1s0: authenticate with 74:ea:3a:d7:5c:ec
wlp1s0: send auth to 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 74:ea:3a:d7:5c:ec (try 1/3)
wlp1s0: RX AssocResp from 74:ea:3a:d7:5c:ec (capab=0x411 status=0 aid=2)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
usb 2-2: USB disconnect, device number 5
print_req_error: I/O error, dev sda, sector 0
sd 3:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Buffer I/O error on dev sda2, logical block 3702784, lost sync page write
JBD2: Error -5 detected when updating journal superblock for sda2-8.
Aborting journal on device sda2-8.
Buffer I/O error on dev sda2, logical block 3702784, lost sync page write
JBD2: Error -5 detected when updating journal superblock for sda2-8.
usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=1153
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: AS2115
usb 2-2: Manufacturer: ASMedia
usb 2-2: SerialNumber: 00000000000000000000
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-2:1.0
scsi 3:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
mmc1: Tuning timeout, falling back to fixed sampling clock
perf: interrupt took too long (7830 > 7823), lowering kernel.perf_event_max_sample_rate to 25500
usb 2-2: USB disconnect, device number 6
print_req_error: I/O error, dev sda, sector 0
sd 3:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-2: new SuperSpeed USB device number 7 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=1153
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: AS2115
usb 2-2: Manufacturer: ASMedia
usb 2-2: SerialNumber: 00000000000000000000
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-2:1.0
scsi 3:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-2: USB disconnect, device number 7
print_req_error: I/O error, dev sda, sector 0
sd 3:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd
usb 2-2: New USB device found, idVendor=174c, idProduct=1153
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: AS2115
usb 2-2: Manufacturer: ASMedia
usb 2-2: SerialNumber: 00000000000000000000
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-2:1.0
scsi 3:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[drm:wait_panel_status [i915]] *ERROR* PPS state mismatch